Emergency Services

 The flapper may be broken What is a flapper? It is the device in the toilet tank that allows water to flow into the toilet bowl. Over time, they can easily wear out and become ineffective in their task. For this reason, this is one of the most common causes of toilet leaks . Defective flush valve If the flapper has been repaired or replaced and the toilet continues to leak, there may be a problem with the flush valve. The flush valve facilitates the passage of water from the tank to the bowl for ‘flushing’. A leaking flush valve can make water drip for a long time after flushing.  Defective fill valve   Another common cause of toilet leakage is a problem with the fill valve. The fill valve (of course) is the fitting that fills the tank from the supply line. A leaking fill valve can cause water to spill onto the floor and form small puddles. The problem is recognisable by the sound it makes (as if the toilet is running continuously), even if you have not flushed the toile...

 RISK OF DAMAGE AND INJURY As with any type of plumbing repair , there is always a risk of injury or accident. Even highly trained leak repair technicians are very careful and wear the required safety equipment before starting work. Needless to say, untrained people are more exposed to the risk of accidents. INEFFICIENT REPAIRS Water leaks may not be properly addressed if they are repaired with a do-it-yourself approach. Repairing leaks without supervision is likely to lead to even more frequent failures. In addition, other problems that may result from unresolved leaks may become more costly to fix as time passes. For this reason, it is best to outsource leak repair services to professionals for optimal and lasting results. UNDERLYING PROBLEMS While you may 'fix' the obvious leaks that you can see, you may overlook the underlying problems with your plumbing system. Invisible problems can create future plumbing problems that may be more difficult to solve. Using advanced water ...

 Most sink water filter problems can be easily solved without having to call in a professional plumber. The most common problems are filter clogging, tank damage and water type. To assess the problem, get an old towel to catch any drips and a torch, as areas under sinks are usually quite dark. Clogged filter When was the last time the filter was changed? The job of a filter is to trap particles in the water to prevent them from coming out of the tap. Most manufacturers of water filter systems recommend changing the filter at specific regular intervals, such as every month or every 90 days. If the filter has been doing its job for too long, it may simply be clogged with residue. The solution is simple: replace the filter. If the filter is reusable, clean it thoroughly, replace it and it should be fine. Once the filter has been replaced, run water through it to check that the system is working as it should. If the problem persists, it is possible that a component of the filter pump i...

 Whether you need to replace a ball valve because it is defective or you are carrying out a bathroom renovation, it can be useful to know how to do it yourself. By following a few steps, you can save time and money. Empty the cistern If you are replacing an existing ball valve, you must start the process of installing a new valve by emptying the cistern. To do this, disconnect the water supply to the toilet and draw the water out of the cistern. This will allow you to access the mechanism more easily and work more smoothly. Access Access the area of the cistern where the new component is to be fitted. Remove the cistern cover and set it aside, resting it flat so that it is not in danger of slipping and breaking. Although the cistern cover should simply lift off, the flush lever on top of the cistern must first be removed. The push-button flush must also be unscrewed and removed. Removing the existing Once the internal mechanism has been exposed, take a good look at it to realise t...

  A water pressure regulator is designed to control water pressure in individual homes. It acts as a synchroniser between the extremely high water pressure of the supplier and the low pressure requirements of the customer. Regulators can be added to a home's water supply to limit damage to taps, showers and other devices in the home. Sometimes, however, the device itself can present problems. Repair often requires a new regulator, but knowing the type of problems that can occur with the device can help users minimise the cost of any collapse. Pressure too low One of the most common problems with the regulator is that the water pressure is set too low, or the water pressure regulator is unable to meet the family's expectations with the low pressure setting. When installing the regulator, make sure that the low pressure setting can meet all the needs of the household, e.g. that the shower and dishwasher can run at the same time. If the water does not maintain adequate pressure, ...

 The inability to flush waste into the toilet is a common problem due to a low-flow toilet. You will notice that the flush is slow and does not go down. Then you have to wait for the tank to fill up and flush again. This can be disgusting and frustrating. A low-flow toilet is usually caused by a handle that is too long or a deformed hinge valve, which can easily be repaired . Opening the toilet Lift the rear part of the toilet and position it so that it does not fall and break. Straddle the toilet and look inside. You will see many simple parts. At the bottom is the hinge valve, to which a chain is attached. The problem is either the chain or the flapper valve. Check the chain First check the chain. The chain is attached to the flush arm. The flush arm is connected to the handle that is used to pull the flush from the outside. When you push the handle down, the flush arm lifts up. The chain connected to the flush arm is pulled upwards, opening the flap valve. The chain must be loos...

 Old and obsolete Like any other household appliance, water heaters deteriorate with age. As we have already mentioned, most water heaters can last up to 10 years. Around 10 years, replacement is recommended. This will tell you whether it is time to replace your current water heater . It makes loud noises If you hear a loud knocking noise coming from the water heater, this indicates that something is wrong. This problem is normally found in older water heaters, when sediment accumulates at the bottom of the tank. Over time, these apparently harmful sediments begin to harden at the bottom of the tank. The hardening of sediments at the bottom of the tank can cause strange noises. This is not good news. It means that the water heater is not working as efficiently as it should. If you leave this problem unattended, you can accelerate the damage to the water heater, with the risk of a costly replacement in a short time. Standing water around the tank It is very common to find standing w...

  Replacing the toilet tank gasket is a simple operation to perform if you have leaks in your toilet. Below, we explain how to complete this project with the right materials and instructions. Turn off the water Turn off the water at the stop valve. This is usually located on the side of the toilet, towards the rear. Then flush the toilet to empty the remaining water. You can then use a plunger to remove the water from the bowl itself. Use a crescent spanner to disconnect the water supply line. Remove the lid Remove the tank lid. Use a sponge to absorb excess water that may have remained in the toilet tank. This will create a more comfortable working space and prevent water from seeping into the new connections. Loosen and remove Now that you see the inside of the tank, you should be able to locate the bolts that secure the tank in place. Use the crescent spanner and fasten the bolts from underneath the tank while loosening the bolts from above. You can now easily and carefully rem...