How to install a ball valve


 Whether you need to replace a ball valve because it is defective or you are carrying out a bathroom renovation, it can be useful to know how to do it yourself. By following a few steps, you can save time and money.

Empty the cistern

If you are replacing an existing ball valve, you must start the process of installing a new valve by emptying the cistern. To do this, disconnect the water supply to the toilet and draw the water out of the cistern. This will allow you to access the mechanism more easily and work more smoothly.

Access

Access the area of the cistern where the new component is to be fitted. Remove the cistern cover and set it aside, resting it flat so that it is not in danger of slipping and breaking. Although the cistern cover should simply lift off, the flush lever on top of the cistern must first be removed. The push-button flush must also be unscrewed and removed.

Removing the existing

Once the internal mechanism has been exposed, take a good look at it to realise the position of each component. You will find that the existing float arm that supports the ball valve is supported by a split pin that can be straightened to allow its release and removal. In this way you will be free to remove the plug at the end of the cylindrical component, the so-called piston.

If it is difficult to remove, pour a small amount of lubricating oil on the fastener and allow it to act on the thread to loosen it. After unscrewing the end cap, slide on the rest of the piston and the end washer.

Installation of replacement part

Use the instructions included with your new ball valve kit to familiarise yourself with all components and how they fit together. Before replacing any components, use a piece of wire wool to remove any debris or mineral deposits from the original stem that supports the piston.

Replace the new washer before reassembling the entire piston and fixing it in place. The float arm can then be reattached. To prevent the fasteners from stiffening again, apply a small amount of Vaseline to the threads before reassembling the end cap.

Call the Emergency Plumber in Bolton. We are your right contact partner.


Location: Bolton, UK

Comments

Post a Comment

Popular posts from this blog

24-Hour Locksmith Services Coventry

Image
Residential Locksmith Services In Coventry Area Emergency Locksmith Services in Coventry provides professional residential locksmith services in Coventry and the near areas . We collaborate with technicians who're able to provide vicinity residents with fast, efficient, and reliable locksmith services . TRUSTED | PROFESSIONAL | LOCAL We assist you to steady your property, protect your family, and provide you with the peace of mind you deserve. We know the fine details of key duplication, intelligent key structures, automotive keys, and lots more. Locksmithing and protection are our passion, and we’re right here 24/7 to assist each one of the clients discover the safety solutions they need . Emergency Locksmith in Coventry provides plenty of residential locksmithing services including: Emergency Locksmith 24/7 Door Installation And Repair Burglary Repair Services Lock Repair And Replacement Door Frame Repair Window Repair In Coventry, 24-Hour Locksmith Services Our name is what we
Read more

How to drain the hot water tank

Image
 The hot water tank or water heater must be emptied once or twice a year because it can accumulate mineral deposits and sand. This causes the hot water tank to lose its efficiency and you have access to less hot water. Emptying the water tank is easy, here are the simple steps to do it. Switching off the water heater For gas hot water tanks, turn off the main gas switch, for electric hot water tanks, turn off the switch. Shut off the water supply to the tank. Allow the tank to cool for about two hours. Connect the garden hose Connect the garden hose to the drain valve at the base of the water tank and place the opposite end of the hose outside to drain the water. Allow the water tank to drain completely Open the hot water tap and the drain valve to ensure that the tank drains completely. After draining the tank, carefully reopen the valve that supplies cold water; wait at least five minutes and close the tank drain valve. Remove the garden hose. Close the tap with the hot water tap op
Read more

Troubleshooting water heater problems: Noisy pipes

Image
 Noisy pipes can be caused by problems with the water heater. When you start hearing noises in the water pipes, these can be caused by air or lack of air, obstructions and blockages in the water line. Here are some steps you can take to identify the problem. Water hammer Water hammer is a dull sound that results from the sudden pressurisation of the water line caused by the rapid closing of a tap or other water valve. The water rises rapidly, causing a loud hammering sound in the pipes. This damages the pipes over time. Water hammer only occurs when water is not flowing. You can rule out water hammer if you hear the noise while the water is flowing. Shut off the water supply to your house and drain the water from the pipes by opening a low tap, such as an outside tap or a tub. Turn off all taps and turn the water back on in the house by opening a tap and closing it. If you do not hear the clunk noise, the problem is a water hammer. Clunk noise Toilet ball valve - A damaged or faulty to
Read more