5 important reasons to flush the water heater


 When was the last time you flushed your water heater? If the answer is more than a year or, worse, never, it is time to give the tank a clean. Removing old water and accumulated mineral deposits is one of the few maintenance requirements for the water heater. Here are five important reasons why it is necessary to flush the water heater about once a year.

More efficient heating

Calcium and magnesium build-up in the water heater can affect the efficiency of the appliance. Heating the water may require more energy. If you have not flushed the tank for a long time, you may notice that the water is not as hot as before. You may also notice a difference in your gas or electricity bill, as more energy may be required to heat the water.

Sediment can cause slower heating

When sediment accumulates in the tank of a water heater, it creates an insulating layer between the water and the heating element. This means that the water takes longer to heat up. If you run out of hot water, the water heater will take much longer and consume more energy to heat the tank than when it was cleaned of sediment.

Sediment can cause clogging

If mineral sediments accumulate in the water heater, they can become a hard layer of minerals inside the tank. Pieces of this sediment can break off and clog the outlet of the tank, reducing the amount of hot water that can escape or creating a complete blockage of the system. This can lead to the need for repairs and a higher outlay of money.

Reducing the service life of the water heater

If you do not flush your water heater regularly, you can reduce the lifespan of the appliance. Most water heaters last about ten or more years, but if components have to work harder due to a large amount of sediment in the tank, the water heater may need to be replaced sooner than expected. This can be expensive; you want the water heater to last as long as possible, which is why maintenance is so important.

Metal deformation and leaks

One of the main reasons for flushing the water heater is to prevent damage to the tank. Sediment in the tank can cause hot spots that deform and damage the metal of the tank. This can lead to leaks in the tank. 

Call the Emergency Plumber in Durham. We are 24 hours available.

Location: Durham, UK

Comments

Post a Comment

Popular posts from this blog

24-Hour Locksmith Services Coventry

Image
Residential Locksmith Services In Coventry Area Emergency Locksmith Services in Coventry provides professional residential locksmith services in Coventry and the near areas . We collaborate with technicians who're able to provide vicinity residents with fast, efficient, and reliable locksmith services . TRUSTED | PROFESSIONAL | LOCAL We assist you to steady your property, protect your family, and provide you with the peace of mind you deserve. We know the fine details of key duplication, intelligent key structures, automotive keys, and lots more. Locksmithing and protection are our passion, and we’re right here 24/7 to assist each one of the clients discover the safety solutions they need . Emergency Locksmith in Coventry provides plenty of residential locksmithing services including: Emergency Locksmith 24/7 Door Installation And Repair Burglary Repair Services Lock Repair And Replacement Door Frame Repair Window Repair In Coventry, 24-Hour Locksmith Services Our name is what we
Read more

How to drain the hot water tank

Image
 The hot water tank or water heater must be emptied once or twice a year because it can accumulate mineral deposits and sand. This causes the hot water tank to lose its efficiency and you have access to less hot water. Emptying the water tank is easy, here are the simple steps to do it. Switching off the water heater For gas hot water tanks, turn off the main gas switch, for electric hot water tanks, turn off the switch. Shut off the water supply to the tank. Allow the tank to cool for about two hours. Connect the garden hose Connect the garden hose to the drain valve at the base of the water tank and place the opposite end of the hose outside to drain the water. Allow the water tank to drain completely Open the hot water tap and the drain valve to ensure that the tank drains completely. After draining the tank, carefully reopen the valve that supplies cold water; wait at least five minutes and close the tank drain valve. Remove the garden hose. Close the tap with the hot water tap op
Read more

Troubleshooting water heater problems: Noisy pipes

Image
 Noisy pipes can be caused by problems with the water heater. When you start hearing noises in the water pipes, these can be caused by air or lack of air, obstructions and blockages in the water line. Here are some steps you can take to identify the problem. Water hammer Water hammer is a dull sound that results from the sudden pressurisation of the water line caused by the rapid closing of a tap or other water valve. The water rises rapidly, causing a loud hammering sound in the pipes. This damages the pipes over time. Water hammer only occurs when water is not flowing. You can rule out water hammer if you hear the noise while the water is flowing. Shut off the water supply to your house and drain the water from the pipes by opening a low tap, such as an outside tap or a tub. Turn off all taps and turn the water back on in the house by opening a tap and closing it. If you do not hear the clunk noise, the problem is a water hammer. Clunk noise Toilet ball valve - A damaged or faulty to
Read more