5 simple steps for a do-it-yourself water heater repair

Hot water is a luxury that most of us cannot do without. Think of all the different ways you use hot water in your daily life: washing dishes, washing clothes, bathing, cleaning, etc. If your home water heater stops working, you will have an idea of ​​how important and precious your water heater is for your daily routine and your lifestyle. There are a couple of different types of water heaters: electric and fuel or gas. Each works slightly differently, but both perform the same functions, including heating the water and storing hot water until it is ready to be used. A water heater thermostat is the most commonly damaged or broken part of a water heater. When the thermostat of a water heater breaks, you will not be able to measure or set the temperature of the hot water. Maintaining the integrity of the thermostat is important to prevent the water from reaching boiling temperatures. Call a professional plumber in Manchester for water heater repair.

When should you repair your water heater thermostat?

There are some telltale signs you should watch out for when it comes to your water heater. Some of the signs below may indicate that your water heater needs repair.

Your water is too hot

5 simple steps for a do-it-yourself water heater repair
Resource: Flickr
Too hot water is a great indicator that the thermostat is set too high. Other external factors such as the seasons can contribute to this problem and it is necessary to change the recommended setting based on the transition from cold to hot weather. If you are unable to lower the water temperature, it may be necessary to replace the entire thermostat or check for any wiring problems. Find an emergency plumber to help you troubleshoot your thermostat wiring to avoid injury or further damage.

There is not enough hot water

Lack of hot water can also be caused by low temperatures. You may have cold pipes that aren't insulated or you may have a broken thermostat. Some other possible problems may include loose cables, faulty parts or the hot water tank is too small for your usage needs.

The water takes too long to heat up

Electric water heaters typically take a long time to heat up. The time it takes to heat an electric stove is double the time it takes for a gas stove. If you feel that heating is taking even longer, there may be a problem with the heating elements or the thermostat.

A step by step guide to repairing a water heater thermostat

The thermostat regulates the temperature of the water in a water heater. If the temperature is set too low, the water will cool down before being distributed to the tap. Similarly, if the temperature is too high, you could risk burning or scalding the temperature of the water released from the tap.

Here's how to fix a thermostat if you don't have hot water:

  1. Locate the top and bottom thermostats.
  2. Check both thermostats for power supply.
  3. Press the button to reset the thermostat and determine if it will work or not.
  4. Replace the thermostat if there is no power to the upper system.
  5. If the upper system receives electricity but there is no hot water, replace the upper heating element.

If the water temperature is incorrect, you can easily adjust the thermostat yourself. Here are three simple steps for Manchester residents to follow.

Here are some other factors that can cause problems with the water heater:

  • The drain valve
  • The entrance of cold water
  • A rod of the sacrificial anode
  • A diving tube
  • A pressure relief valve

If you have problems with your water heater in the Manchester area, contact your local expert plumber to determine if the water heater needs to be replaced or repaired. Call Manchester Plumber Emergency.

Comments

Popular posts from this blog

24-Hour Locksmith Services Coventry

How to drain the hot water tank

Troubleshooting water heater problems: Noisy pipes