Emergency Services

 A leaking, running toilet wastes more water than a dripping tap. In fact, fixing toilet problems by  repairing a leak can save hundreds of litres of water per day. Signs of toilet problems include the sound of running water and the fact that the toilet turns on and off without flushing. The following is some information on toilet repair and tips for solving the most common problems. CLOGS Clogs are the most common toilet problems. Usually a plunger can clear minor clogs.  REPLACING THE DOOR From time to time, you may hear that the toilet starts to fill up, as if someone has flushed the toilet. A toilet that turns on and off by itself, or that works intermittently, has a problem that plumbers call a ‘ghost flush’. The origin is a slow leak from the tank to the bowl, almost always caused by a faulty door or door seat. The solution is to empty the tank and bowl, check and clean the flapper seat and replace the flapper if it is worn or damaged.  HISSING If you hear a c...

 If a leak occurs in an upstairs bathroom, it is important to locate the source of the leak and stop the flow of water as soon as possible. Otherwise, your home will be at risk of serious water damage. When a water leak occurs from the floor of an upstairs bathroom and you are not sure where it came from, you should check three plumbing systems: the toilet, the tub/shower and the sink. WHAT TO CHECK IN EACH SYSTEM: Toilet - The seal between the toilet and the floor is called a wax ring. A defective or worn wax ring can allow water to leak into the subfloor and ceiling every time you flush. Symptoms of a defective wax ring are water on the floor near the base of the toilet and an unpleasant smell of sewer gas. If you do not see water on the floor around the toilet, it is possible that a leakage around the wax ring is causing water to leak directly into the subfloor. Shower - If the leakage occurs while the water is running, the problem is probably a damaged tile in the shower or ...

  The water heater's shut-off valve is a very important part of the water heater . If the valve is defective, you should not delay in replacing it. The good news is that you can do it yourself and you do not have to spend money to hire a professional. With the right tools and this guide, you can replace the shut-off valve yourself and save some money. Turning off the heater If you have a gas water heater, turn off the gas supply. Let the water heater cool down before touching any parts. If the water heater is equipped with an electric ignition system, the power must be disconnected from the switch box. Shutting off the water supply If you cannot shut off the water with the shut-off valve, use the main valve to shut off the water supply to the house. Draining the water Use an electric pump or ground hose to drain the heater. The water may still be hot, so care must be taken. Take measurements Note the dimensions of the existing valve. Also note the type of valve, i.e. whether it is ...