Emergency Services

 If homeowners pay special attention to safety and local building regulations, it is possible to wire a room with lights and sockets for electricity yourself. Tackling do-it-yourself projects like this requires careful planning and the right tools. Working with electricity carries the inherent risk of injury and fire, so make sure you have thoroughly researched the process before tackling it. Getting started Check local regulations and building codes Before you start, make sure you comply with local building regulations and use the correct materials for your work. In addition, many regions require permits or licensed electricians for major electrical work. Check compliance with local rules and regulations. Planning the layout Decide in advance where to place lighting and sockets and mark them appropriately. When determining lighting and socket requirements, consider the size and use of the room you are wiring. Install electrical boxes Once you have determined where to place the so...

  The light bulb has been replaced and you are still in the dark. Naturally, you go through the usual scenarios to solve the problem. You check whether the circuit breaker on the switchboard is switched on - it is - now what? As a final check, you suspect that it could be the light switch itself. Switches should remain maintenance-free for many years. If they do fail, there are a few things you can test and change to see if that fixes the problem.  Step 1 Always switch off the power to the panel before starting any electrical repairs. If you can find the appropriate circuit breaker for the light switch, switch it off, otherwise switch off the main switch and make sure you have broken the circuit. For safety reasons, lock the switch to prevent others from switching it on. Step 2 Take a flat-blade screwdriver and remove the screws holding the cover plate of the light switch. Then take a Phillips screwdriver and unscrew the fixing screws at the top and bottom of the switch. Care...